Minet MS Series

MINET MS 45 Hinge Fastener

For an actual picture of an installed MS45 click HERE

Fastener Specifications

Type	MS 45
Belt thickness range	5.0 - 11.0 mm
Minimum pulley diameter	125 mm
Belt tension-rating up to	65 N/mm
Fastener material	Antimagnetic Stainless or Galvanised Steel
Installation	Using M5 self-locating screws and a battery powered drill.

Choose your screw size

Belt thickness	Corresponding screw size
5.0 to 6.9 mm	5 x 10 mm
7.0 to 8.9 mm	5 x 12 mm
9.0 to 11.0 mm	5 x 14 mm

To download and print a datasheet (in PDF format), move your mouse-pointer over HERE, right click your mouse and choose "save target as" from the menu. Do the same for INSTALLATION instructions