Type: |
Airport |
Belt thickness range: |
3.0 - 6.0 mm |
Minimum pulley diameter: |
35 mm |
Belt tension-rating up to |
20 N/mm |
Fastener materials: |
Antimagnetic Stainless or Galvanised Steel |
Installation: |
With copper or SS rivets 2.9 mm Ø (160 rivets per meter length) |
Hinge pins: |
Bare steel (3.0 mm Ø or stainless steel (2.5 mm Ø) |
Shipping: |
As required, up to 3000 mm in one length |
Tooling: |
Stanley knife, hammer, 3.0 mm rivet holder and rivet breaker |
